How do I stop my HP printer from printing a test page?

How to Stop the HP Printer From Printing Test Pages

1. Click “Start.”
2. Click “Control Panel.”
3. Click “Devices and Printers.”
4. Double-click on your HP printer icon to open the print queue. Click on the listing for your test page. Click “Cancel” to stop your printer from completing that particular job.

Why does my printer print an alignment page every time I turn it on?

An ink cartridge alignment page prints every time you start a print job or turn on your printer. This issue usually occurs when a cartridge is replaced and the alignment process is not completed.

How do I turn off HP alignment page?

Follow these steps to open the printer toolbox and align the printer, if you found defects on the extended self-test report.

1. Press and hold the Cancel button ( ) and the On/Resume button ( ).
2. Release both buttons.
3. Press the Cancel button ( ) again.
4. Press the Copies button.
5. Press the Paper Type button.

How do I get my printer to stop printing the page?

Here are the steps to turn it off.

1. Click the ‘Office Button’ (top-left corner of the window) then ‘Print’
2. Click ‘Options’ (bottom-left corner of the print window)
3. Choose the ‘Display’ section.
4. Untick ‘Print document properties’
5. Click OK to all the windows and you’re done.

What do I do when my printer keeps printing everything?

How to: Network printer is printing same page non-stop

1. Step 1: Stop the print job and clear the print queue. A.
2. Step 2: Restart the Print Spooler. A.
3. Step 3: Disable Bidirectional Support. A.
4. Step 4: Reprint other canceled print jobs.

How do I stop my HP printer from calibrating?

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. Remove USB cable, if present. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Why is my HP printer not printing properly?

To resolve most print quality issues, use genuine HP cartridges, and in some cases, you might need to allow the printer to complete the automatic servicing routine. Check the paper and print settings to make sure that they are correct for the print job, and clean the cartridges and printhead.

Why does my HP printer says alignment failed?

HP printers that are misaligned may be unable to correctly print documents. Your printing device can display failed alignment errors when its ink cartridges are not genuine. Sometimes, the printhead of your machine may not be clean. This is likely to be the reason behind the HP printer alignment failed problem.

How do I manually align my printer?

Print Head Alignment

1. Open the printer driver setup window.
2. Click Custom Settings on the Maintenance tab. The Custom Settings dialog box opens.
3. Switch head alignment to manual.
4. Apply the settings.
5. Click Print Head Alignment on the Maintenance tab.
6. Load paper in the machine.
7. Execute head alignment.
8. Check the printed pattern.

What is alignment page for HP printer?

An alignment page is a page that you print and then scan using your HP Officejet all-in-one printer. This allows the printer to read the printout and automatically adjust the alignment of the print cartridges for optimized printing results.

How do I stop printing information?

Click the Microsoft Office Button, and then click Word Options. In the Printing Options area box, click to clear the Print document properties check box, and then click OK.

Why is my Word document not printing properly?

Step 1. Disable any third party Office add-ins and then try to print. Uninstall the printer from your computer and then re-install the latest driver version for your Printer model and then try to print again. If after reinstalling the printer driver you face the same problem proceed to next step.

What prints every page of a document?

You can either print the entire document or you can print a portion of it. To print only selected pages, follow these steps: Choose the Print option from the File menu, or simply press Ctrl+P. Word displays the Print dialog box.