How do I fix my Epson printer with blank lines?

Fix Epson Printer Printing With Lines Missing or Printer Skipping Lines Issues

1. Fix 1: Run the Clean Print Cartridges Utility.
2. Fix 2: Clean the Contacts of Your Epson Printer.
3. Fix 3: Remove the Black Cartridges For Two Hours.
4. Fix 4: Replace the Problematic Cartridge.
5. Epson Printer Models Compatible with these Fixes.

Why is my printer printing blank lines?

White lines will typically start appearing on your print outs due to a clogged up printer head. Your first port of call when solving this problem is to run the cleaning program on your printer, which should be accessible through its settings menu.

How do I fix my printer with blank lines?

The summary (TL;DR):

1. Clogged printhead nozzles or low ink levels are the most common cause for blank or light bands.
2. Use the built-in cleaning cycle or manually clean the printhead.
3. For vertical blank bands, check for paper or labels blocking the print in specific areas.

How do I get rid of the lines on my Epson printer?

If you see any missing lines, either click the “clean” button in your software, or push & hold the cleaning button on the front of the printer for three seconds. The printer will run a cleaning cycle. After it finishes run another nozzle check and verify that all the steps are printing cleanly.

How can you tell if a printhead is clogged?

HP printheads clog periodically as small amounts of ink or dust dry up and collect in the nozzle. Faint, streaky or spotty prints are all common signs of a clog but a simple cleaning can usually get your HP ink cartridges working again. Printheads clog due to infrequent cartridge use.

Can you manually clean printer heads?

You can clean the printhead either manually or from your printer or computer. Before you start, you’ll want to perform a nozzle check to ensure your printhead needs cleaning, as this will save ink.

How do I clean printer lines?

The most common fix to remove lines and shading on your print jobs

1. Pull the print cartridge out.
2. Look to see if there is a line on the imaging drum of the print cartridge.
3. Replace the defective print cartridge with a new one.
4. Place the print cartridge back in the machine.

How do you reset your Epson printer?

To Factory Reset an Epson printer:

1. Turn off the printer.
2. Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port).
3. Turn on the printer while holding the reset button.
4. Wait until a message prints indicating that the printer is resetting.