Why does my Brother printer not print anything?

The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. Once you are able to print, enable your firewall again.

How do I get my Brother printer to print?

Printing from a Windows PC or Mac

1. Select the Printer Driver from the [Downloads] section of this website, and then install it.
2. Open the document you want to print.
3. Turn the printer on.
4. Connect the printer to a computer using USB, Bluetooth^® or Wi-Fi®.
5. Load paper.
6. Print from the application.
7. Turn the printer off.

What do I do if my Brother printer won’t print?

Here’re the fixes:

1. Check the connection.
2. Set your Brother printer as the default device.
3. Restart the Print Spooler service.
4. Update your printer driver.
5. Clear the print queue.
6. Print from other programs.
7. Factory reset your Brother printer.

Why is my printer connected but not printing?

My printer won’t print Make sure there is paper in the tray (s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.

What to do if the printer is not printing?

What to Do When Your Printer Won’t Print a Document

1. Check Your Printer’s Error Lights.
2. Clear the Printer Queue.
3. Solidify the Connection.
4. Ensure You Have the Right Printer.
5. Install the Drivers and Software.
6. Add Printer.
7. Check that Paper Is Installed (Not Jammed)
8. Fiddle with the Ink Cartridges.

How do you reset a Brother printer?

[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].

How do I use Brother printer?

Connect the Brother printer to the App Turn on the printer. Connect the device using the Check-In app to the same WiFi network as the printer. In the Check-In app, choose a setup that requires a printer and select AirPrint. Select the Brother printer from the list.

How do I get my Brother printer back online?

Open Printers and Devices windows from Control Panel. Again Right-click on the selected printer and click on “Set as default printer”. Under “Set as default printer” you can see your Printer status – offline or paused. If the Brother printer is paused, simply click on “ Resume printing ”.

Why has my Brother printer stopped working wirelessly?

The network connection between your computer and the wireless router may be unavailable or set up incorrectly. If you replaced your wireless router or access point, or changed its settings, reconnect your Brother machine to the new wireless router or access point.

How can I test my Brother printer?

Print a Test page

1. Make sure that the front cover is closed and the power cord is plugged in.
2. Turn on the printer and wait until the printer is in the Ready state.
3. Press any of the Menu buttons (+, -, OK or Back) to take the printer off line.
4. Press + or – to choose “Machine Info”.
5. Press + or – to choose “Test Print”.

Why is my HP printer connected but not printing?

Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.

Why is my Canon printer connected but not printing?

The key reasons for Canon printer not printing are given as below: The print jobs are stuck in printer queue. Paper jams disable the printer’s ability to print. Faulty drivers or wireless connection do not allow the printer to print.

What do I do if my HP printer is not printing?

Resolving Print jobs stuck in queue and other printing problems using the HP Print and Scan Doctor

1. Windows: Download HP Print and Scan Doctor.
2. Run HPPSdr.exe from the download location on your computer.
3. Once HP Print and Scan Doctor is open, click Start, and then choose your printer.
4. Click Fix Printing.