Why is my HP printer not printing?
SOLUTION 1: Check HP Printer Status 1) Make sure your HP printer has enough paper in the paper tray. If there is paper then make sure none of it is stuck or jammed in the paper feed. New HP printers will easily display the ink levels or if there is an ink issue on the front screen of the HP printer.
Why is my printer connected but not printing?
My printer won’t print Make sure there is paper in the tray (s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.
What to do if printer is not printing?
What to Do When Your Printer Won’t Print a Document
- Check Your Printer’s Error Lights.
- Clear the Printer Queue.
- Solidify the Connection.
- Ensure You Have the Right Printer.
- Install the Drivers and Software.
- Add Printer.
- Check that Paper Is Installed (Not Jammed)
- Fiddle with the Ink Cartridges.
The control panel will display SELECT LANGUAGE. Press (Down Arrow) button until control panel displays COLD RESET. Press (Select). The printer will perform a cold reset and then continue its power-on sequence.
Why are my documents not printing?
First, make sure the printer is on and has paper in the tray. Next, check to make sure the printer cable is properly connected to both the computer and the printer. If you still can’t print, check to make sure the printer is not set to offline mode. Go to Start, Printers and Faxes.
Why the printer is not responding?
If your printer fails to respond to a job: Check that all printer cables are connected properly and be sure that the printer is turned on. If everything is connected properly and powered up, go to the computer’s “control panel” from the “start” menu. Cancel all documents and try printing again.
How do I reset my HP printer error message?
Reset the printer to recover from printer failures.
- With the printer turned on, disconnect the power cord from the printer.
- Unplug the power cord from the power source.
- Wait 60 seconds.
- Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.