Why is my printer not printing when the ink is full?

While an empty ink cartridge is a pretty common reason why this problem occurs, it isn’t always the case. There are numerous possible causes for a printer that’s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles.

Why is my printer not working after replacing ink cartridges?

Verify the ink cartridge(s) has been inserted properly. If a lever has been changed from its original position to allow the installation of ink cartridges, ensure it has been returned to its original position. Perform a head cleaning on printer if available. Try resetting the ink cartridge counter.

What happens when printer ink runs out?

How do i know when to replace my ink cartridge and can i damage my printer if i run out of ink during printing? The ink cools a Canon print head, firing the nozzles with no ink flowing usually results in print head death.

Why is my HP printer not printing after changing cartridges?

Running an extended cleaning cycle may correct the problem and help the printer recognize the cartridge. Check your printer for a “Cleaning” button and press it or hold it down for a few seconds. After running the cleaning cycle, print a test page to determine whether the printer can print again.

How do I fix my printer not printing black ink?

Some Basic Things To Start

1. Turn off your printer, unplug from the power source and disconnect USB cables as well.
2. Print a “Quality Diagnostic Report” or a “Print Test Page”.
3. You can usually find this option on your printer’s display screen.
4. Check printer ink levels to double check the ink volume in your cartridges.

How do I get my printer to recognize ink cartridges?

Here are a few steps to try to alleviate the issue: Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!

How do I fix my HP printer not printing black ink?

What to do if my HP printer is not printing black?

1. Clean the printhead.
2. Open the Printer troubleshooter.
3. Fix the printing with HP Print and Scan Doctor.
4. Add a genuine Hewlett-Packard cartridge to the printer.
5. Replace cartridges that are low on ink.
6. Align the printhead.

How long before printer ink dries up?

When still sealed in the original packaging, the shelf life is probably in the range of two to three years. An original printer cartridge that comes with your printer is likely closer to 24 months, while a compatible cartridge may come closer to 36 months.

Why does Epson ink run out so fast?

If your printer is consuming too much ink during printing, try these solutions: Make sure you selected the correct Media Type setting in the printer driver that matches the paper you loaded in the printer. Lower the density of ink in the Paper Configuration menu in the printer driver.

Does printer ink run out if you dont use it?

Ink cartridges that have been sitting idle in your machine for more than a couple weeks will eventually dry out. You might be able to bring them back to life by running a cleaning on your machine, but if the pattern continues, you will eventually be placing an order for a set of replacement cartridges.

How do I fix a HP printer that is not printing?

Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.

Why is my HP printer printing blank pages when it has ink?

Check the ink levels on your printer. Low or empty cartridges can also cause the printer to print blank pages. So, check the ink/toner levels on your printer and replace cartridges if necessary.

Why is my printer printing color but not black?

First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.