How do I fix HP printer Error?

Quick fix

1. Make sure the printer is turned on. You can also restart both the printer and your computer.
2. Check if the printer is connected to your computer or WI-FI network.
3. Make sure the paper try of your printer is loaded and that the printer has enough ink.
4. If the error still occurs, contact the HP printer support.

Why is my printer printing error?

Corrupt data in the spool/printing tray might be causing this service to stop. The other most probable reason for the printing error is the connection between your computer and the printer. This can be the printer drivers or the USB port drivers.

How do I fix error printing?

How do I fix Printer Error in Windows 10?

1. Open the Printer Troubleshooter. Enter ‘troubleshoot’ in the text box to search for Troubleshoot settings.
2. Clear the Print Spool Folder. Users have also said that they’ve fixed Error Printing by clearing the Print Spooler folder.
3. Check the Printer’s Port Settings.

Why does it say my printer is in an error state?

Sometimes, simply restarting both your computer and printer can be the solution to the “printer in error state” issue. Power off your printer and computer completely, leaving them in this state for a few minutes, then turn them on again to see if the problem is gone.

How do I reset my HP printer error message?

Reset the printer to recover from printer failures.

1. With the printer turned on, disconnect the power cord from the printer.
2. Unplug the power cord from the power source.
3. Wait 60 seconds.
4. Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.

Why is my HP printer in error state?

The ‘HP printer is in an error state’ issue can also arise due to faulty or incompatible printer driver. However this can be fixed easily by updating or reinstalling the drivers.

How do you reset your printer?

It’s a pretty simple process:

1. With the printer turned on, pull out the power cable from the back of the printer.
2. Unplug the power cable from the wall outlet.
3. Wait 15 seconds.
4. Plug the power cable into the back of the printer.
5. Plug the printer back into the wall outlet.
6. Turn the printer back on.
7. Run a test print.

Why is my HP printer not printing the whole page?

Reasons for Printer Not Printing Whole Page Problem 1: Firstly, you need to check that is there is paper in the tray. 2: Check the ink or toner cartridges and ensure it shouldn’t remain empty. 3: The USB cable should be plugged inappropriately. 4: The printer should be connected to Wi-Fi.

How do I clear the print spooler error?

To solve this error, try the following steps.

1. Press “Window key” + “R” to open the Run dialog.
2. Type “services. msc“, then select “OK“.
3. Double-click the “Printer Spooler” service, and then change the startup type to “Automatic“.
4. Restart the computer and try to install the printer again.

How do I clear the error code on my HP printer?

To temporarily clear the error, reset the printer.

1. With the printer turned on, disconnect the power cord from the printer.
2. Unplug the power cord from the power source.
3. Wait 60 seconds.
4. Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.

How do I fix printer in error state?

How do I get my printer out of an error state?

1. Make ports settings changes. Press the Windows logo key + R on your keyboard > type devmgmt.msc and hit Enter to open the Device Manager.
2. Make sure that your printer is Online.
3. Reinstall the printer driver.
4. Set the Print Spooler service to automatic.
5. Update Windows.