How do I fix my smudge on my Brother printer?

Make sure the printer platen is not dirty with ink. Unplug the machine from the AC power outlet. Lift the scanner cover until it locks securely in the open position. Clean the machine’s printer platen(1) and the area around it, wiping off any scattered ink with a soft, dry, lint-free cloth.

Why does my Brother printer keep smudging?

Dots are typically caused by foreign material inside the machine (for example, paper dust, glue from labels or envelopes, paper clips, staples) sticking to or damaging the surface of the drum. Toner builds up on or sticks to these areas on the drum and creates black dots on the printed pages.

What causes smudges when printing?

What Causes Smudges When Printing? Black lines and smudges on your document may indicate that your printer is dirty. Dirt, dust, or toner accumulated on the rollers or transfer belt can cause smears and smudges on the paper as it goes through the paper.

How do I stop my printer from smudging?

Don’t use regular white printer paper when you print pictures or other images. Instead, use a thick, high-quality photo paper to prevent ink smears and smudging. Some brands of photo paper, such as those labeled “Instant Dry,” are designed to dry faster than others.

How do I clean my Brother printer?

FAQs & Troubleshooting

1. Do one of the following: – If your Brother machine has the INK key on its control panel, press the INK key.
2. Press the UP OR DOWN ARROW key to select Cleaning.
3. Press the OK key.
4. Press the UP OR DOWN ARROW key to select BLACK, COLOR or ALL depending on what you want to clean.
5. Press the OK key.

What do I do when my printer is smearing ink?

HP Inkjet Supplies – Ink Smears or Streaks

1. Step one: Check your paper. Make sure you printed on fresh, unwrinkled paper.
2. Step two: Run the clean print cartridges utility. Press the Setup button.
3. Step three: Clean the area around the cartridge nozzles. note:
4. Step four: Replace the problem cartridge.

Why is my laser printer smearing?

Smears that appear in addition to otherwise well-formed output may signal toner contamination inside your LaserJet, either from a leaky cartridge or from improperly fused sheets that leave toner residue behind. Smears at the edge of the sheet that enters the printer first point to dirty paper guides.

Why does my printer leave black dots?

1. Dots are typically caused by foreign material inside the machine (for example paper dust, glue from labels or envelopes, paper clips, staples) sticking to or damaging the surface of the drum. Toner builds up on or sticks to these areas on the drum and creates black dots on the printed pages.

How do I know if my printer is aligned?

Windows

1. Click “Start,” then select “Devices and Printers.”
2. Right-click on the printer you need to align, then select “Printing Preferences” from the pop-up menu.
3. Click the “Services” tab, then click the “Align the Print Cartridges” icon.
4. Follow the instructions from the Alignment wizard to align the cartridges.

How do I get black smudges off my printer?

Clean the Laser Printer Try cleaning a laser printer that leaves black marks on printed output. To do so, turn the printer off at the wall first. Remove the toner cartridge as outlined within the printer’s manual. Wipe toner off the cartridge with a toner cloth.

How do you fix smudged paper?

5 Ways to Fix Inky Smudges

1. Grab a stamping sponge and use the same color ink to sponge more color on. If the smudge is toward the edge, you can just sponge the edges of your card stock.
2. Use the edge of your ink pad.
3. Cover it with an embellishment.
4. Cover it with another layer of card stock.
5. Cut it out.

Why is my print quality poor?

Printers may produce poor quality printing if they are exposed to too much heat. Don’t place your printers in a high temperature area or near other devices that produce excess heat. In addition, keep them away from windows, where heat and humidity can be high.