- 1 Why is my Brother laser printer not printing properly?
- 2 How do I stop my laser printer from curling?
- 3 How do I calibrate my Brother laser printer?
- 4 Why is my Brother printer not printing the correct size?
- 5 Why is my printer connected but not printing?
- 6 What is the reason why the paper is coming from the printer is creased?
- 7 Do laser printers overheat?
- 8 How do I stop pages from curling?
- 9 How do you keep print paper from curling?
- 10 What should you use to clean a laser printer?
- 11 How do I fix the alignment on my Brother printer?
- 12 Can a Brother laser printer print in color?
- 13 How do I change my default Brother printer?
- 14 How do I make my printer print in actual size?
Why is my Brother laser printer not printing properly?
The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. Once you are able to print, enable your firewall again.
How do I stop my laser printer from curling?
Paper curl is caused by an excess amount of moisture in the paper.
- The first step to ensure less paper curl is to store your paper in a cool, dry area.
- The next step is to always fan the paper before placing in the machine.
- It could be the paper itself.
- If possible use a different output tray on your machine.
How do I calibrate my Brother laser printer?
FAQs & Troubleshooting
- Press Menu.
- Press the Up or Down Arrow key to to choose Printer and press OK.
- Press the Up or Down Arrow key to to choose Calibration and press OK.
- Press the Up or Down Arrow key to to choose Calibrate and press OK.
- Press 1 to choose Yes.
- The machine will display Completed.
- Press Stop/Exit.
Why is my Brother printer not printing the correct size?
The most common cause for this issue is that the document size setting that is within the application DOES NOT match the paper size that is loaded within the machine’s paper tray. It is very important that you adjust the application’s document size.
Why is my printer connected but not printing?
My printer won’t print Make sure there is paper in the tray (s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.
What is the reason why the paper is coming from the printer is creased?
When your printer’s internal components are dirty or clogged, the paper starts to wrinkle. Wrinkling also occurs when the rollers inside your printer pull the paper through incorrectly. Wrinkling not only damages the paper, but also causes paper fragments to contaminate your printer’s internal parts.
Do laser printers overheat?
Fuser error 50.3 signals that your machine is overheating. Your fuser may overheat due to the type of paper you use. Your printer would have to heat its fuser to a higher temperature to bond the toner to the thick paper. If your printer’s fuser runs at a higher temperature for a prolonged period, it would overheat.
How do I stop pages from curling?
6 Art Journal Tips: How to Keep Your Pages Flat
- Use less water. The wetter the page, the more likely it will curl.
- Use heavier paper.
- Paint the other side.
- Reach for the gesso.
- Tape before painting.
- Use gravity.
How do you keep print paper from curling?
Turn over the stack of paper in the paper tray, fan it and rotate it 180 degrees. You should always fan a stack of paper before putting it in the tray. This action helps to separate the sheets and prevent them from sticking together. Make sure the weight of the paper agrees with the printer setting.
What should you use to clean a laser printer?
What you will need to clean a laser printer:
- Switch your printer off, unplug and allow to cool down.
- Put on your latex gloves and dust mask.
- Remove the imaging drum.
- Remove the toner cartridge.
- Speak to a qualified engineer to clean internal parts.
- Clean surfaces with isopropyl alcohol wipes.
- Reassemble parts.
How do I fix the alignment on my Brother printer?
Press [Ink ]>[Improve Print Quality]>[Alignment]. You can also press [Settings]>[Maintenance]>[Improve Print Quality]>[Alignment]. Press [Next]. Swipe up or down or press or to display the paper size that needs a print alignment adjustment, and then press it.
Can a Brother laser printer print in color?
Color laser printers and color LED printers produce high-impact documents with clear, rich colors and sharp images. And whether you’re opting for a single function printer or an all-in one with print, copy, scan and fax capabilities, Brother offers a device that’s ideal for your needs.
How do I change my default Brother printer?
To adjust the default settings of the printer driver, complete the following steps:
- Open the Printers Folder. Click here to see how to open Printing Preferences.
- Right-click on the Brother printer driver and left-click on Printing Preferences. You can change the following settings: Basic tab. Advanced tab.
How do I make my printer print in actual size?
Click Start, point to Settings, and the click Printers. Right-click the appropriate printer, and then click Properties. Click the Paper tab, and then click the paper size you want to use in the Paper Size box.