What does red light on printer mean?

Status indicator light: A blue or green light indicates the printer is operating correctly, while a red light indicates an error has occurred.

How do I clear a Brother printer error?

To clear these messages, follow these steps:

1. Press the ON/OFF key to turn the Brother machine off.
2. Unplug the Brother machine from the electrical outlet.
3. Wait approximately ten seconds.
4. Plug the Brother machine back into the electrical outlet.
5. Press the ON/OFF key to turn the Brother machine on.

Why is my Brother printer error light flashing?

If the Error LED is flashing, use the steps below to check the following: paper jam in the drum area, fuser cover may be open, paper jam in rear, or memory full or print overrun. If the printer still does not start printing, check that all the remaining jammed paper has been removed from the printer.

Why is the Brother printer not printing?

The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. Once you are able to print, enable your firewall again.

Why is there a orange light on my printer?

When the printer shows orange light blinking, it mostly means some issues with the printer cartridge, toner, or simply corrupted configuration settings as reported by the user in the Microsoft Community.

How do I reset my printer?

It’s a pretty simple process:

1. With the printer turned on, pull out the power cable from the back of the printer.
2. Unplug the power cable from the wall outlet.
3. Wait 15 seconds.
4. Plug the power cable into the back of the printer.
5. Plug the printer back into the wall outlet.
6. Turn the printer back on.
7. Run a test print.

How do I troubleshoot my Brother printer?

Brother Printer Troubleshooting Tips To Follow

1. Check the power supply.
2. Try turning your printer off and restart it if you face any issue in between sometime.
3. Check network/ USB cables or USB ports out timely.
4. Uninstall-Re-Install New Brother drivers.
5. Resetting and Deleting of Print Jobs.

How do I clear the error on my Brother HL 2270dw?

Reset drum light on Brother HL-2270dw

1. Open the front door to the printer.
2. Press and hold the “Go” button until all four status LEDs turn on (Toner, Drum, Error, Ready).
3. Release the “Go” button.
4. Close the front door of the printer.

How do I reset my Brother?

[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].

Why is my printer connected but not printing?

My printer won’t print Make sure there is paper in the tray (s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.

What to do if the printer is not printing?

What to Do When Your Printer Won’t Print a Document

1. Check Your Printer’s Error Lights.
2. Clear the Printer Queue.
3. Solidify the Connection.
4. Ensure You Have the Right Printer.
5. Install the Drivers and Software.
6. Add Printer.
7. Check that Paper Is Installed (Not Jammed)
8. Fiddle with the Ink Cartridges.

Why is my printer spitting out blank pages?

When your printer suddenly starts printing blank pages, you may immediately think that you’ve run out of ink. There are numerous possible causes for a printer that’s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles.