Can you put 3 hole paper in a printer?
We typically use 3 – hole pre punched computer paper in our printer. With the HP Officejet Pro 7740, the paper is loaded so when you print single-sided, the paper is printed with the holes on the left side but when you print 2-sided, the holes are on the wrong side.
Can you put hole punched paper in a printer?
You can load pre-punched paper in a paper drawer or the multi-purpose tray. When loading pre-punched paper, take note of the orientation of the binding holes and the image. When the paper is loaded into the multi-purpose tray, the side facing down is the one printed on.
How do you add hole punch paper to a printer?
Load Hole-Punch Paper in Trays 1, 2, 3, and 4
- Select the appropriate paper for your print job.
- Pull out the tray slowly until it stops.
- Open the ream of paper with the seam side facing up.
- Before loading paper into the tray, fan the sheets of paper.
- Load the hole-punch paper against the left edge of the tray.
How do you hole punch a Xerox printer?
Scroll down and select [Left], [Right], or [Top] from the Punch Position menu. Select [2 Holes], [3 Holes] or [4 Holes] from the Hole Punching menu. Select [Face Down] from the Face-down Printing menu. Select the required paper type and any other options, and then click [OK] twice to print the job.
What is dot matrix printer?
A dot matrix printer is an impact printer that prints using a fixed number of pins or wires. Typically the pins or wires are arranged in one or several vertical columns. The pins strike an ink-coated ribbon and force contact between the ribbon and the paper, so that each pin makes a small dot on the paper.
How much margin do I need for a 3 hole punch?
Most three- hole punches will punch holes about half an inch from the edge of the paper, so 0.75 inches gives you a little extra room.