Contents
- 1 Why does my HP printer Say error printing?
- 2 How do I fix HP printer Error?
- 3 Why does it keep saying error while printing?
- 4 Why does it say my printer is in an error state?
- 5 How do I reset my HP printer error message?
- 6 How do I fix printer errors?
- 7 How do I check my HP printer for errors?
- 8 Why does my HP printer keep saying ink system failure?
- 9 How do I clear the print spooler error?
- 10 How do you get a printer out of error state?
- 11 How do I clear the error code on my HP printer?
Why does my HP printer Say error printing?
An issue most commonly associated with driver or printer cable problems, turning the printer off and on should see this error message disappear. A hardware problem may be the reason the error message persists. Try resetting the printer initially and reinstall the toner cartridge if the problem persists.
How do I fix HP printer Error?
Quick fix
- Make sure the printer is turned on. You can also restart both the printer and your computer.
- Check if the printer is connected to your computer or WI-FI network.
- Make sure the paper try of your printer is loaded and that the printer has enough ink.
- If the error still occurs, contact the HP printer support.
Why does it keep saying error while printing?
When you invoke your printer, the task calls the printing spool service which then adds your document to the printer queue. Corrupt data in the spool/printing tray might be causing this service to stop. The other most probable reason for the printing error is the connection between your computer and the printer.
Why does it say my printer is in an error state?
Sometimes, simply restarting both your computer and printer can be the solution to the “printer in error state” issue. Power off your printer and computer completely, leaving them in this state for a few minutes, then turn them on again to see if the problem is gone.
How do I reset my HP printer error message?
Reset the printer to recover from printer failures.
- With the printer turned on, disconnect the power cord from the printer.
- Unplug the power cord from the power source.
- Wait 60 seconds.
- Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.
How do I fix printer errors?
How do I fix Printer Error in Windows 10?
- Open the Printer Troubleshooter. Enter ‘troubleshoot’ in the text box to search for Troubleshoot settings.
- Clear the Print Spool Folder. Users have also said that they’ve fixed Error Printing by clearing the Print Spooler folder.
- Check the Printer’s Port Settings.
How do I check my HP printer for errors?
Double-click on the HP printer icon in the system tray on the bottom right of the screen, if it appears. Look under “Status” in the printing queue to read the error messages.
Why does my HP printer keep saying ink system failure?
For the HP 932-933 ink-series printer error message “Ink System Failure” or “Printhead Failure” typically one of the ink cartridges could be low (or empty) on ink. It also possible that a poor seal is present between the cartridge and the internal printhead and the cartridge may need to be replaced with a new one.
How do I clear the print spooler error?
To solve this error, try the following steps.
- Press “Window key” + “R” to open the Run dialog.
- Type “services. msc“, then select “OK“.
- Double-click the “Printer Spooler” service, and then change the startup type to “Automatic“.
- Restart the computer and try to install the printer again.
How do you get a printer out of error state?
How do I get my printer out of an error state?
- Make ports settings changes. Press the Windows logo key + R on your keyboard > type devmgmt.msc and hit Enter to open the Device Manager.
- Make sure that your printer is Online.
- Reinstall the printer driver.
- Set the Print Spooler service to automatic.
- Update Windows.
How do I clear the error code on my HP printer?
To temporarily clear the error, reset the printer.
- With the printer turned on, disconnect the power cord from the printer.
- Unplug the power cord from the power source.
- Wait 60 seconds.
- Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.