How do you fix a ink cartridge that won’t print?

To clear more severe blockages, you can manually clean the ink cartridges and lines by wiping them with isopropyl alcohol or soaking the print head in water. If nothing works, you will need to replace the ink cartridge or have the printer serviced.

Why is my printer not printing even though it has ink?

Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Print a nozzle check pattern to see if any of the nozzles are clogged. Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct.

How do I get my printer to recognize my refilled cartridge?

Your printer remembers empty cartridges

1. Remove the empty cartridge and refill it.
2. Insert an additional full cartridge into the printer.
3. Turn on the printer and wait for it to recognize the cartridge.
4. Remove the additional cartridge before printing an alignment page.

Why is my HP printer not accept refilled cartridge?

Ink cartridges that have been refilled can damage the integrity of the ink cartridge which can sometimes cause leaks in your printer. The manufacturers chip would also need to be reset as the printer may read the chip and think that it is empty. If this isn’t done, then the printer will fail to recognise the cartridge.

How do you fix a clogged ink cartridge?

The holes in the cartridge may be clogged with oil. Try warming your cartridge with a hair dryer (lowest heat setting) or by rubbing it between your hands to warm up the oil and change its viscosity. You can also poke a toothpick or safety pin gently in the hole to help de-clog it.

What do I do when my printer is printing blank pages?

What to do if your Printer is Printing Blank Pages?

1. Fix # 1 – Restart your Printer.
2. Fix # 2 – Resolve Ink / Toner Cartridges Problems.
3. Fix # 3 – Unclog the Print head (Automatic Cleaning)
4. Fix # 4 – Unclog the Print Head (Manual Cleaning)

How do I fix my printer not printing properly?

What to Do When Your Printer Won’t Print a Document

1. Check Your Printer’s Error Lights.
2. Clear the Printer Queue.
3. Solidify the Connection.
4. Ensure You Have the Right Printer.
5. Install the Drivers and Software.
6. Add Printer.
7. Check that Paper Is Installed (Not Jammed)
8. Fiddle with the Ink Cartridges.

How can you tell if a printhead is clogged?

HP printheads clog periodically as small amounts of ink or dust dry up and collect in the nozzle. Faint, streaky or spotty prints are all common signs of a clog but a simple cleaning can usually get your HP ink cartridges working again. Printheads clog due to infrequent cartridge use.

How do I reset my printer cartridge?

Fortunately, there is a simple solution to this problem.

1. Locate and take out both the black and the color ink HP cartridges from your printer.
2. Press the “On” button on your printer to turn it on, wait 20 seconds, then turn it off.
3. Replace the black and the color HP cartridges inside the printer.

How can I trick my HP ink cartridge?

How Do You Trick HP Ink Cartridges?

1. Remove the new ink cartridge and reload the old ink cartridge back into the printer.
2. Wait for about 10 minutes before you proceed to the next step.
3. Remove the old ink cartridge and install the new ink cartridge again.

Why won’t my HP printer print after I changed the ink?

If your ink cartridge sat in storage for any length of time, the ink may have started to dry out. Running an extended cleaning cycle may correct the problem and help the printer recognize the cartridge. After running the cleaning cycle, print a test page to determine whether the printer can print again.