Why is my Canon printer connected but not printing?

The key reasons for Canon printer not printing are given as below: The print jobs are stuck in printer queue. Paper jams disable the printer’s ability to print. Faulty drivers or wireless connection do not allow the printer to print.

How do I reset my Canon MG2922 printer?

Press the Stop button and hold it for a few seconds. Do not release it until the Orange color Alarm lamp blinks 21 times. After 21 times, release the Stop button. The Canon Pixma MG2922 reset process will complete in a few seconds.

How do I fix my Canon printer from printing blank pages?

Unclog the Print Heads

1. Firstly, switched off the printer & remove the unclog print heads.
2. Remove cartridge from Canon printer.
3. Then, clean printer by a clean soft cloth.
4. Put a new ink cartridge and start using the printer.

Why is my printer not responding Canon?

Printer is not responding The computer and access point (or wireless router) have lost connection. Restart the computer and then attempt to print again. The printer’s signal strength is low due to its distance from the access point (or wireless router). Move the printer closer to the access point (or wireless router).

Why is my printer connected but not printing?

My printer won’t print Make sure there is paper in the tray (s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.

What to do if printer is not printing?

What to Do When Your Printer Won’t Print a Document

1. Check Your Printer’s Error Lights.
2. Clear the Printer Queue.
3. Solidify the Connection.
4. Ensure You Have the Right Printer.
5. Install the Drivers and Software.
6. Add Printer.
7. Check that Paper Is Installed (Not Jammed)
8. Fiddle with the Ink Cartridges.

How do I troubleshoot my Canon Pixma printer?

How to troubleshoot network communication issues with the printer

1. Make sure that the printer is not displaying any errors (flashing lights or error codes on the screen).
2. If there have been no changes to your wireless network (new router, new password for your router, etc.), turn off and unplug your printer.

How do I reset my Canon Pixma printer?

1 Factory Reset

1. Press Setup.
2. Press the arrow buttons until you navigate to Device settings and then press OK.
3. Press the arrow buttons until you navigate to Reset setting and then press OK.
4. Press the arrow buttons until you navigate to Reset all and then press OK.
5. Select Yes.
6. Press OK. Your device is now reset.

How do I reset my Canon wireless printer?

How to Factory Reset a Canon Printer: Instructions

1. Press Setup on your Canon device, then navigate to Device settings through arrow keys and press OK.
2. Now, navigate to Reset setting, then press OK, and then navigate to Reset all option.
3. Press OK, then select Yes, and therefore, your device is now reset.

Why is my Canon Maxify not printing?

Check2 Check the status of ink tanks. Replace the ink tank if the ink has run out. Check to see if a particular color’s ink tank is not empty. If the Nozzle Check Pattern is not printed correctly though ink is sufficient, perform the Print Head Cleaning and try printing the Nozzle Check Pattern again.

How do I clear a Canon printer error?

Reset the Canon printer

1. Switch on the printer.
2. Press and hold the Stop/reset button.
3. Press the button that you use to make a color copy and hold it down.
4. Wait 5 seconds.
5. The printer now reboots and sets itself up.
6. Does the printer indicate that the device needs to be calibrated?
7. You’ve reset your printer.

Why is my wireless printer not responding to my computer?

If your printer fails to respond to a job: Check that all printer cables are connected properly and be sure that the printer is turned on. If everything is connected properly and powered up, go to the computer’s “control panel” from the “start” menu. Cancel all documents and try printing again.