- 1 Why is my HP printer printing blank pages when it has ink?
- 2 How do I fix my HP printer that prints blank pages?
- 3 Why does my printer randomly print blank pages?
- 4 Why is my printer not printing in Windows 10?
- 5 How do I fix my printer not printing black ink?
- 6 How can you tell if a printhead is clogged?
- 7 Why is my printer not printing black when ink is full?
- 8 Why is my HP printer connected but not printing?
- 9 How do I stop printing blank pages?
- 10 Why is my word doc printing blank?
- 11 How do I clear my printer queue?
- 12 How do I fix the print spooler in Windows 10?
Why is my HP printer printing blank pages when it has ink?
Check the ink levels on your printer. Low or empty cartridges can also cause the printer to print blank pages. So, check the ink/toner levels on your printer and replace cartridges if necessary.
How do I fix my HP printer that prints blank pages?
To resolve this issue, use only genuine HP cartridges. Additionally, you can remove the black cartridge to print only with the tri-color cartridge, replace any empty or defective cartridges, or clean the printhead.
Why does my printer randomly print blank pages?
Why Is My Printer Printing Blank Pages? There are numerous possible causes for a printer that’s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
Why is my printer not printing in Windows 10?
If your printer won’t print in Windows 10, or you cannot connect to your printer, run the troubleshooter by doing the following: Plug in your printer into the power supply. Check the USB connection if using a wired printer, or wireless connection for wireless printers. Download and run the printing troubleshooter.
How do I fix my printer not printing black ink?
Some Basic Things To Start
- Turn off your printer, unplug from the power source and disconnect USB cables as well.
- Print a “Quality Diagnostic Report” or a “Print Test Page”.
- You can usually find this option on your printer’s display screen.
- Check printer ink levels to double check the ink volume in your cartridges.
How can you tell if a printhead is clogged?
HP printheads clog periodically as small amounts of ink or dust dry up and collect in the nozzle. Faint, streaky or spotty prints are all common signs of a clog but a simple cleaning can usually get your HP ink cartridges working again. Printheads clog due to infrequent cartridge use.
Why is my printer not printing black when ink is full?
A printer might not print black ink if it has not been calibrated. Thus, calibrating an Hewlett-Packard printer by aligning its printhead might fix its printing. Most HP printers will include an Align Printhead option on their Printer Maintenance or Tools control panel menus that users can calibrate them with.
Why is my HP printer connected but not printing?
Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.
How do I stop printing blank pages?
Select your printer and then select Manage > Printing Preferences and then select Skip Blank Page.
Why is my word doc printing blank?
Word document shows 0 bytes and appears blank when opened indicates that the file has been corrupted in some way. And when it attacks, the content of your Word document is gone and the file is shown as empty.
How do I clear my printer queue?
How do I clear the print queue if a document is stuck?
- On the host, open the Run window by pressing the Windows logo key + R.
- In the Run window, type services.
- Scroll down to Print Spooler.
- Right click Print Spooler and select Stop.
- Navigate to C:WindowsSystem32spoolPRINTERS and delete all files in the folder.
How do I fix the print spooler in Windows 10?
How to fix print spooler using Services
- Open Start on Windows 10.
- Search for services.
- Right-click the Print Spooler service and select the Properties option.
- Click the General tab.
- Click the Stop button.
- Use the Windows key + R keyboard shortcut to open the Run command.