Why is my printer printing extra copies?

Check the settings at the printer level, check if there is an option for copies, that happened to us long time ago and what happened was that the client by mistake was changing some setting on the printer itself and set the numbers of copy to 3.

Why is my printer printing so many pages?

If printer pulls too many pages while printing, the issue is most likely your roller. Sometimes your printer roller can become smooth due to prolonged use and that cause this issue to appear. The only way to fix this issue is to replace the roller.

Why is my printer printing the same page over and over?

Usually this issue occurs if there is any file missing or corrupted in the Printer drivers/print spooler. I would suggest you to try the following methods and check if it works for you. Method 1: Run the Printer troubleshooter and check if it helps.

How do I make my printer print two copies?

Click Devices and Printers. Select number of copies. If it is set to 2, change it to 1 and see if it helps. 4. Adjust number of copies from the document

1. Click File.
2. Select Print.
3. Select Copies.
4. Adjust the number of copies.

How do I stop my printer from printing so many pages?

Cancel printing from Windows

1. On the Windows taskbar, at the bottom-right corner of the screen, right-click the Printer icon.
2. Select Open All Active Printers.
3. In the Active Printers dialog box, select the printer you want.
4. In the printer dialog box, select the print job you want to cancel.
5. Click Document > Cancel.

What do I do if my HP printer is printing blank pages?

How to fix HP Printer that Prints blank pages?

1. Turn Off your HP Printer by unplugging the power cable from the back of it.
2. Uninstall the HP Printer drivers from the Control Panel of the computer.
3. Delete the HP Printer from the Devices and Printers list.
4. Turn On the HP Printer.

Why is my printer not printing even though it has ink?

Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Print a nozzle check pattern to see if any of the nozzles are clogged. Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct.

How do I fix my HP printer that prints blank pages?

5 simple fixes to try:

1. Check ink cartridges.
2. Run the Windows printer troubleshooter.
3. Update the printer driver.
4. Download and run HP Print and Scan Doctor.
5. Configure Print Spooler service.

How do I stop printing?

A. Click Control Panel. Click Printer. Click your printer’s icon, and then click See What’s Printing on the command bar (located at the top of the page). Right-click the document you are trying to stop from printing, click Cancel, and then click Yes to confirm.

How do you fix printer symbols?

What can I do if my printer is printing random symbols?

1. Run Printer Troubleshooter. Click on Start and select Settings.
2. Update the printer driver. Press Windows Key + R to open Run.
3. Clear the Printer Queue.
4. Uninstall and reinstall your printer.

How do I set my printer to print 2 copies by default?

Set your computer to default “double-side” with the following seven steps or watch the helpful video.

1. Start menu > “Control Panel”
2. Choose “Printers and Faxes”
3. Right click your primary printer.
4. Choose “Printing Preferences”
5. Choose “Finishing” tab.
6. Check “Print on both sides”
7. Click “Apply” to set as the default.

Why does my HP printer print everything twice?

Go to Hewlett Packard folder, remove any printer related folders & files. Restart the computer. Download the printer driver and install it from this link or manually search for drivers from https://support. hp.com/us-en/drivers/printers. Try printing from your PC again and check if you can print.

How do I enable bidirectional support on my printer?

Follow these steps to enable bidirectional support:

1. Press “Windows key + X” and click on “Control Panel”.
2. Click on “Devices and Printers”.
3. Right click on your printer and click on “Printer Properties”.
4. Click on “Ports tab”.
5. Make sure to check the box “Enable Bidirectional Support” (Enable Bidirectional Support).