Why does my printer say out of paper in photo tray?

Check for obstructions inside the input tray and photo tray. Make sure that nothing blocks the paper from engaging with the rollers. Even small pieces of paper can cause paper feed issues.

Why does my HP printer not print on photo paper?

The photo tray is overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the tray face down. The paper width guide is too tight against the paper stack.

Why does my HP Envy printer say it’s out of paper when it’s not?

The printer does not pick up or feed paper from the tray, and An ‘Out of paper’ message displays on the control panel. Check the condition of the paper, make sure that the printer rests on a flat surface, adjust the paper settings in the print driver, and clean the paper feed rollers to resolve the issue.

Why does my Canon printer keep saying out of paper?

Paper Does Not Feed Properly /”No Paper” Error Occurs. Check1 Make sure that paper is loaded. In such cases, reduce the sheets of paper you load at a time to less than half of the paper load limit. Always load the paper in portrait orientation, regardless of the printing orientation.

How do I fix my photo tray problem?

Solution one: Check the photo tray

1. Lift the output tray and extend the photo tray. Figure: Extend the photo tray.
2. Remove all photo paper from the photo tray.
3. Slide the photo tray all the way into its slot, as far as it can go.
4. Lower the output tray, and then press the OK button ( ) on the control panel.

What to do if printer says out of paper?

The printer is out of paper: How to fix this error

1. Check and Reload the Paper.
2. Check the Printer’s Rear Panel Cover.
3. Reset the Printer.
4. Clean the Printer’s Rollers.
5. Check the Print Spooler is on.
6. Clear the Print Caches.
7. Update Your Printer’s Driver.
8. Is Your Printer Windows 10 Compatible?

Why has my printer stopped printing photos?

One of the main reasons why a printer may not be printing the photos you have asked it to is because the machine is not connected up properly.

How do I clean the rollers on my HP printer?

Clean the pickup roller

1. Unplug the power cord from the product, and then remove the pickup roller.
2. Dab a lint-free cloth in isopropyl alcohol (or water), and then scrub the roller.
3. Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.

How do I reset my printer?

It’s a pretty simple process:

1. With the printer turned on, pull out the power cable from the back of the printer.
2. Unplug the power cable from the wall outlet.
3. Wait 15 seconds.
4. Plug the power cable into the back of the printer.
5. Plug the printer back into the wall outlet.
6. Turn the printer back on.
7. Run a test print.

How do you update printer drivers?

How to update printer drivers

1. Go to Control Panel.
2. Click on ‘Hardware and Sound’
3. Click on ‘Device Manager’ to show all of the connected hardware on your machine – look for the ‘Printers’ drop-down which will contain any relevant printers.
4. Right click the printer you want to update the drivers on and click ‘Update driver’

How do I clean the rollers on my Canon printer?

My Canon Account

1. Prepare the printer.
2. Open the printer driver setup window.
3. Click Roller Cleaning on the Maintenance tab.
4. Select Rear Tray, and click OK.
5. Open the Rear Tray.
6. Place a moistened cotton swab, etc. to one of the protrusions (A) of the feed roller shaft.
7. Execute paper feed roller cleaning.

How do I fix the paper feed on my Canon printer?

If the problem isn’t resolved

1. Turn off the power and unplug the power cord.
2. Wipe the right and center paper feed rollers inside the rear tray with a moistened cotton swab. Rotate the rollers 2-3 times while wiping.
3. After cleaning the paper feed rollers, turn on the power, then clean the paper feed rollers again.

How do I reset my Canon Pixma printer?

1 Factory Reset

1. Press Setup.
2. Press the arrow buttons until you navigate to Device settings and then press OK.
3. Press the arrow buttons until you navigate to Reset setting and then press OK.
4. Press the arrow buttons until you navigate to Reset all and then press OK.
5. Select Yes.
6. Press OK. Your device is now reset.