How do I fix HP printer not printing?

Resolving Print jobs stuck in queue and other printing problems using the HP Print and Scan Doctor

1. Windows: Download HP Print and Scan Doctor.
2. Run HPPSdr.exe from the download location on your computer.
3. Once HP Print and Scan Doctor is open, click Start, and then choose your printer.
4. Click Fix Printing.

Why is my printer not printing even though it is connected?

The printer you plugged in to a USB hub on a system with too many peripherals to accommodate a direct connection may refuse to work that way. Shut down the printer and restart to reset on the printer end. If that is not the issue, check the connection at your wireless router and reset the router as well.

What to do if printer is not printing?

What to Do When Your Printer Won’t Print a Document

1. Check Your Printer’s Error Lights.
2. Clear the Printer Queue.
3. Solidify the Connection.
4. Ensure You Have the Right Printer.
5. Install the Drivers and Software.
6. Add Printer.
7. Check that Paper Is Installed (Not Jammed)
8. Fiddle with the Ink Cartridges.

Is there a reset button on HP printers?

The control panel will display SELECT LANGUAGE. Press (Down Arrow) button until control panel displays COLD RESET. Press (Select). The printer will perform a cold reset and then continue its power-on sequence.

Why are my documents not printing?

First, make sure the printer is on and has paper in the tray. Next, check to make sure the printer cable is properly connected to both the computer and the printer. If you still can’t print, check to make sure the printer is not set to offline mode. Go to Start, Printers and Faxes.

How do I reset my HP printer error message?

Reset the printer to recover from printer failures.

1. With the printer turned on, disconnect the power cord from the printer.
2. Unplug the power cord from the power source.
3. Wait 60 seconds.
4. Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.

Why has my HP printer stopped working?

Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.